![updated sas hba crossflashing dell perc h200 and h310 updated sas hba crossflashing dell perc h200 and h310](https://m.media-amazon.com/images/I/41Yjf9qWuDL.jpg)
Ⅵ、Reboot the computer and boot back into the USB drive.Į、The same steps will flash the card to a LSI 9211-8i Ⅴ、sas2flsh -o -sasadd 500xxxxxxxxxxxxx (replace this address with the one you wrote down in the first steps). Ⅲ、Reboot the computer and boot back into the USB drive. If this command fails it should be safe to proceed to step 2. Ⅸ、Write down the SAS Address and continue to the next steps.ĭ、The steps for flashing the H310 and H200 will be the same. Ⅶ、This should dump all the information for the card including the SAS Address. Ⅴ、Use the number in the first column to get the SAS Address for the card. Ⅲ、You should get a listing of all the cards installed. Ⅰ、To save the SAS Address we’ll need to use sas2flsh. (If you have a UEFI motherboard then see the steps below for UEFI motherboards) Ⅱ、Hit enter once or twice and you should scroll through screens that look like this:Ĭ、If you have a Dell Perc H200 then follow the below steps. The drive also shows up indented here and labeled Patriot Memory PMAP.į、Clicking or Double-clicking on Patriot Memory should boot into the DOS environment as shown below.Ī、If your card doesn’t have a sticker with the SAS Address you should be able to follow these steps to obtain the address.ī、If you have a Dell Perc H310 then follow these steps. This is presented on the Save & Exit tab. Yours will most likely be labeled by whatever type of drive you have.ĭ、In the below screen shot you can see a GIGABYTE UEFI BIOS screen. The USB drive shows up indented and labeled Patriot Memory. At this screen you can hit F8 and select a boot device. This will be different for every motherboard but should be similar.ī、In the below screen shot you can see an ASUS UEFI BIOS Utility screen. If not you will need to select the drive from a boot menu. If it does then write this down so it’s easily accessible.ġ、First thing we need to do is prepare the USB drive.Ī、Once you’ve created the bootable USB drive in step 1 you want to copy the contents of sLSI-9211-8i.zip onto the USB drive.ī、The root of the USB drive should look like this:Ģ、Next we’ll want to reboot and boot into FreeDOS/MS-DOS.Ī、With the bootable USB drive inserted (may work best in a USB port on the back of the computer) a reboot may boot directly into the USB drive. I、Make sure you don’t cover the A pins on the other side.ĥ、Your card may have a sticker on it marked SAS Address. (Thanks to Andy_Steb from AVS for sharing this tip he found) You can cover them with a thin piece of electrical tape.
![updated sas hba crossflashing dell perc h200 and h310 updated sas hba crossflashing dell perc h200 and h310](https://i.ebayimg.com/images/g/KdIAAOSwwY9fP-WA/s-l400.jpg)
(Thanks to mobilenvidia and Bryan Vyhmeister for providing/finding a lot of the files and information used here)Ī、Both of these guys have provided great guides on flashing IBM M1015 cards and other great information.Ĥ、If you have a Dell Perc H310 and your computer won’t boot then you’ll need to cover PCIe pins B5 and B6. You can follow this post on using Rufus to create a quick FreeDOS bootable USB drive.Ģ、For those with newer UEFI motherboards you’ll need boot圆4.efi ( link) (alternate link).Ī、You’ll want the version: Precompiled x86_64 UEFI Shell v1 binary.ī、This should already be included in the LSI-9211-8i.zip I’ve provided in the next link.ģ、LSI-9211-8i.zip tools ( link).
![updated sas hba crossflashing dell perc h200 and h310 updated sas hba crossflashing dell perc h200 and h310](https://m.media-amazon.com/images/I/41O1Eh+Um8L._AC_.jpg)
So let’s get down to what we’re going to need.ġ、Bootable USB ( link). All of the information you need is out there but I had a hard time finding it in one place and with the detail needed to not fumble through the process. For users like myself who only had newer motherboards with UEFI it gets a little tricky. This process is pretty well documented on various sites and forums for users that have an older motherboard with a typical BIOS.
#Updated sas hba crossflashing dell perc h200 and h310 drivers#
These devices are no longer supported because all support for VMKlinux drivers and their devices have been completely removed in 7.0.I just wanted to go through a few things I found while trying to flash IT firmware to my Dell Perc H310. Deprecated devices supported by VMKlinux drivers Devices that were only supported in 6.7 or earlier by a VMKlinux inbox driver.